01642 224544
Take control of your grow room climate with the G.A.S Enviro v2 Fan Controller. This advanced hydroponic climate controller manages both temperature and humidity, ensuring optimal conditions for plant growth. Compatible with AC and EC fans, it automates your ventilation and also controls additional equipment like heaters and humidifiers via programmable sockets.
-
Enhance your indoor growing environment with the G.A.S Enviro v2 Fan Controller, the perfect climate control system for any hydroponic setup. This advanced controller provides precise management of both temperature and humidity, ensuring your plants thrive in the optimal conditions needed for explosive growth. With its ability to control a variety of equipment, the Enviro v2 simplifies your grow room operations, making it a must-have for both novice and expert growers.
Key Benefits of using the Enviro V2 Fan Controller
- Automated Climate Control: The Enviro v2 Fan Controller automatically adjusts fan speeds to maintain your desired temperature and humidity settings, eliminating manual adjustments and providing a stable, stress-free environment for your plants.
- Dual Fan Compatibility: Designed to work with both AC and EC fans, this controller offers versatility and is compatible with popular products like the Systemair RVK Duct Fan and Rhino Ultra Silent EC Fan. It also features a built-in balancer to manage both intake and extraction fans for ideal negative pressure.
- Programmable Auxiliary Sockets: The two fully programmable outlets allow you to control other vital grow room equipment such as heaters, humidifiers, and dehumidifiers. This lets you consolidate control of your entire environment into a single, intuitive unit.
- Day and Night Settings: Tailor your environment to your plants' specific needs with separate day and night settings for temperature, humidity, and fan speeds. This feature is crucial for matching your grow room's climate to your lighting cycle.
How to use the G.A.S Enviro V2 Fan Controller
The G.A.S Enviro v2 Fan Controller is a plug-and-play device that is simple to set up.
- Mounting: Secure the controller to a non-flammable surface, ideally outside the grow room to prevent water ingress.
- Sensor Placement: Position the temperature and humidity probe in the middle of your grow room, just above the plant canopy, for the most accurate readings.
- Fan Connection: Plug your AC fans directly into the designated intake and outtake sockets. For EC fans, use the appropriate EC signal cable to connect to the controller. Warning: Do not plug EC fan power leads into the AC sockets, as this can cause severe damage.
- Configuration: Use the easy-to-navigate digital display and menu buttons to set your desired day and night temperatures, humidity levels, and minimum/maximum fan speeds.
For a complete guide, including setting up additional equipment, refer to the detailed instructions provided with the controller or head to the Downloads tab above.
Not the right Fan Controller for you? There's more available on the G.A.S brand page or head to the Fan Speed Controller page for the full range.
Frequently Asked Questions
My fans are not working. What could be the issue?
If your fans are not operating, ensure they are correctly connected to the controller. For EC fans, check that you are using the correct EC signal cable. You can also test the fans by plugging them directly into a mains power source to rule out a fan malfunction.Why is my controller increasing the fan speed when it seems cold?
This can happen if the humidity setting is too low. The controller may be trying to bring in new, drier air to lower humidity to the set level. Simply increase your humidity setting and the controller will function as normal.Can I use the Enviro v2 to control my grow lights?
Yes, the two programmable sockets can be used to control other equipment, including heaters, humidifiers, dehumidifiers and grow lights. However, ensure that the total wattage of the connected lights does not exceed 1200 watts.SKU: 1832 Free delivery on orders over £60*
- UK Mainland onlyStandard Delivery £4.95
- Heavy / Large item surcharge £2 per item
- 1-3 Days**
- UK Mainland onlyExpress Delivery £8.95*
- Next Working Day**
- UK Mainland onlyScottish Highlands £15.95*
- 2-5 Days***Can not be used with Heavy / Large items
**If ordered on a working day before 2pm cut off (Saturday and Sunday are not classed as working days).Please See Delivery and Returns page for more details.
