The Rhino Pro Carbon Filter provides professional-grade odour control using a 50mm bed of Australian RC4-12 activated carbon. Its durable aluminium body and unique airflow design ensure long-lasting, high-efficiency performance, trapping 99% of airborne contaminants and VOCs for a clean grow room.
from £55.00
-
Eliminate unwanted odours and airborne contaminants with the Rhino Pro Carbon Filter, the benchmark for professional-grade air filtration. Constructed with a lightweight aluminium body, a coned internal base for a vortex airflow effect, and a dense 50mm bed of the world's highest-quality Australian RC4-12 activated carbon, this filter ensures maximum filtration efficiency and a lifespan of up to two years. It's the ultimate solution for growers who demand superior performance, reliability, and peace of mind.
Key Benefits of the Rhino Pro Carbon Filter
- Superior Odour Control: The filter's tightly packed 50mm bed of virgin Australian RC4-12 activated carbon traps and neutralises 99% of odour-causing particles.
- Long-Lasting Performance: Engineered for durability, the Rhino Pro Filter maintains its effectiveness for over two years of continuous use, offering exceptional value.
- Optimal Airflow Design: A unique vortex cone base and 51% open-area mesh ensure even air circulation and maximum contact time with the carbon, without restricting airflow.
- Lightweight and Robust: The aluminium body is strong yet lightweight, making for easy handling and installation in any grow tent or room.
- Reduces VOCs: Beyond just odours, the filter is highly effective at removing Volatile Organic Compounds (VOCs), creating a healthier and safer growing environment.
Technical Information- Carbon Type: 50mm bed of virgin Australian RC4-12 activated carbon
- Casing: Lightweight aluminium cylinder with a 51% open-area mesh
- Airflow Features: Coned internal base for a vortex effect and an "Anti Air Bypass" system
- Lifespan: Up to 2 years with continuous use
Available Sizes (Diameter and Airflow):- 100mm x 300mm – 350 m³/h
- 125mm x 300mm – 500 m³/h
- 150mm x 300mm – 600 m³/h
- 150mm x 600mm – 900 m³/h
- 200mm x 400mm – 800 m³/h
- 200mm x 600mm – 1125 m³/h
- 250mm x 600mm – 1420 m³/h
- 250mm x 1000mm – 1900 m³/h
- 315mm x 600mm – 2440 m³/h
- 315mm x 1000mm – 3250 m³/h
- 315mm x 1200mm - 3600 m³/h
How to Use the Rhino Pro Carbon Filter
The Rhino Pro Filter must be matched to a suitable extraction fan with a matching ducting size and airflow rate for optimal performance. Secure the filter to the intake side of your fan using airtight clamps (padded collar) or ducting. For best results, place the filter at the highest point in your grow room as warm, stale air rises. The included pre-filter sleeve should always be used to protect the carbon bed from dust, and should be cleaned or replaced every 3-6 months to maintain efficiency. Rhino Replacement Sleeves available here.Frequently Asked Questions
How long will a Rhino Pro Carbon Filter last?
Rhino Pro Filters are designed for a long lifespan of over two years with continuous use. Longevity can be affected by factors like humidity and the frequency of use. Regularly cleaning or replacing the pre-filter sleeve will help extend its life.Can I use a Rhino Pro Filter with any extractor fan?
The filter's effectiveness depends on it being correctly matched to your fan. You must match both the diameter of the filter neck and the fan's airflow rate to ensure air passes through the carbon bed at the correct speed for proper filtration.How do I know when to replace my filter?
You will know it's time to replace your Rhino Pro Filter when you begin to notice a drop in odour control. The filter's performance will gradually decrease as the carbon becomes saturated. We recommend replacing it every 18-24 months for guaranteed effectiveness.Can I wash or clean the carbon inside the filter?
No, the activated carbon inside the filter is not reusable or washable. The granular carbon traps odours and contaminants on a molecular level. Once it becomes saturated, the filter must be replaced to maintain proper air filtration.SKU: 1013 - 4" (100mm) 100x300
Neck size: 100mm (4”)
Filter height: 300mm
Airflow: 350m3/hr
5" (125mm) 125x300
Neck size: 125mm (5”)
Filter height: 300mm
Airflow: 500m3/hr
6" (150mm) 150x300
Neck size: 150mm (6”)
Filter height: 300mm
Airflow: 600m3/hr
6" (150mm) 150x600
Neck size: 150mm (6”)
Filter height: 600mm
Airflow: 900m3/hr
8" (200mm) 200x400
Neck size: 200mm (8”)
Filter height: 400mm
Airflow: 800m3/hr
8" (200mm) 200x600
Neck size: 200mm (8”)
Filter height: 600mm
Airflow: 1125m3/hr
10" (250mm) 250x600
Neck size: 250mm (10”)
Filter height: 600mm
Airflow: 1420m3/hr
10" (250mm) 250x1000
Neck size: 250mm (10”)
Filter height: 1000mm
Airflow: 1900m3/hr
12" (315mm) 315x600
Neck size: 315mm (12”)
Filter height: 600mm
Airflow: 2440m3/hr
12" (315mm) 315x1000
Neck size: 315mm (12”)
Filter height: 1000mm
Airflow: 3250m3/hr
12" (315mm) 315x1200
Neck size: 315mm (12”)
Filter height: 1200mm
Airflow: 3600m3/hr Free delivery on orders over £60*
- UK Mainland only
Standard Delivery
- Heavy / Large item surcharge per item
- 1-3 Days**
- UK Mainland only
Express Delivery*
- Next Working Day**
- UK Mainland only
Scottish Highlands*
- 2-5 Days***Can not be used with Heavy / Large items
**If ordered on a working day before 2pm cut off (Saturday and Sunday are not classed as working days).Please See Delivery and Returns page for prices and more details.